Craftsman Battery Charger: 19.2V C3 Ni-Cad 1 Hour Charger

If you’re looking for a great Craftsman battery charger to charge your 19.2V ni-cad batteries for your 12 v- 110680, 14.4v-110441, 18v-110451 or 19.2v 315.113753 (130279003, 130279005), then this is the review for you.  Craftsman has introduced a new model 315.CH2020 to replace the old 1425301 model and it’s a great one!

 

Model 315.CH2020 19.2V Craftsman Battery Charger

Sears C3 19.2 Volt Lithium Ion Craftsman Battery ChargerCraftsman has added a new model to their battery charger line-up to replace an aging model and improve capability.  This brand new model of 19.2V Craftsman battery charger has the features and specifications to lead the pack in ni-cad chargers.

This C3 model provides heavy-duty charging power in minimum time.  It will charge your 19.2V lithium-ion battery pack in as little as an hour or less.  It has handy status indicator lights that indicate when the battery is fully charged.

No longer do you have to monitor the charger so that it won’t overcharge.  This model features sleep mode which stops when charging is complete.  This will save your batteries and the extra cost of over-charging.  This model is much faster than previous model designs for quick charging over lunch.  It’s compact and light for easy portability but, has the durable construction to insure years of reliable operation.

The 19.2 volt Lithium-Ion Craftsman Battery Charger can also handle multiple voltages of Craftsman R and EX packs, from 14.4-Volt to 19.2-Volt, all in one hour or less. This model replaces the older model 1425301 and has the flexibility to charge your 12 v-110680, 14.4v-110441, 18v-110451 or 19.2v 315.113753 (130279003, 130279005) batteries.

Backed by a one-year Craftsman limited warranty, this model works with all Craftsman C3 power tools, so you can feel confident about your purchase.



Let’s take a look at some of its great features:

  • Fast one hour 19.2V charging
  • Energy Star rating insures that this charger will conserve energy and helps protect your batteries
  • Won’t overcharge (new feature)
  • Replaces model 1425301
  • Reliable and dependable charging
  • Heavy-duty construction for years of tough use
  • Lightweight at just over a pound
  • Compact size of only 8.3 x 6.4 x 4.1 inches make placement a breeze
  • Multi-chemistry design provides for charging both CraftsmanR and EX Ni-Cad or Lithium-Ion chemistry packs
  • This is the ONLY model that will charge the new Lithium-Ion (#11374).
  • One year limited warranty

Note: This model will not work with older model batteries with the contacts on the outer edge of the post regardless of the voltage.

Buy Craftsmen 19.2V Battery Charger Now

Liked this post? Subscribe to my RSS feed and get loads more!

What do you think of this Craftsmen 19.2V Battery Charger? Please take a moment to leave a comment below.

Please share if you think others will benefit!

As always, thanks for reading!  I hope this article has provided you with valuable information you need to make a decision on the 19.2V C3 Ni-Cad 1-hour Craftsman battery charger.





Web Hosting




FCC Disclaimer



Comments
  1. Adil Omer

    Hi,
    I was wondering if this charger could work in a 220 volts electrical supply, because I intend to send it to Chad, their electrical setting is different than the USA which is 220 v, rather than 110 volts. Thanks you.

    • Mark Ridgeway

      Hi, I’m pretty sure that this model is 120V/60Hz only. Remember too that this is a NiCad charger so your tools should have NiCad batteries. I say that because if you haven’t gotten the tools yet, you should get lithium ion instead and a lithium ion charger. I apologize, I don’t know where to get an overseas compatible, Craftsman-compatible 19.2V Ni-Cad or lithium ion charger. -Mark